Copper Compression Terminal Copper Tubular Lug

During the use of terminal blocks, a large torque is generated to ensure sufficient contact pressure for the wire. As specified in GB2099 and GB16915, tightening or loosening the clamping screw does not cause loosening of the Copper Terminals.  Threaded Copper Terminals, screw self-locking ability to play a decisive factor, the general principle of terminal screw self-locking is based on the "lifting cylinder principle".  When tightening the screw, the screw tightening force does not directly act on the wire, but on the clamping part. The resulting automatic step self-locking makes the screw friction gradually increase, realizes the screw self-locking, and finally clamps the wire on the conductive strip.  There are different torque requirements for different thread diameters, such as M3 pressure screw, requiring a torque of 80N will not cause damage to the terminal.  
There is no air gap in the column of wiring Cold-pressed Terminal magnetic system, and the remanence is too large.  Part of the pole surface at the remanent magnetic gap is filed away to make the gap 0.1-0.3mm, or a 0.1uF capacitor is connected in parallel at the two ends of the coil.  The surface of the contactor core is oily or greasy after a period of use.  Wipe the rust proof grease on the surface of the iron core. The surface of the iron core should be smooth, but it should not be too bright, otherwise it is easy to cause delayed release.  During the entire assembly process, it must withstand the high temperature of the preheating zone and the temperature transmitted to the terminal body by wave soldering.  Flux must not affect Copper Lugs and must be easily removed without any residue.  The entire assembly process must be water-washable. 
We are a professional manufacturer with automatic equipment and strong supply capacity
The company has more than 95% of the full automatic production lines, nissan 200 tons, production capacity continues to adjust and expand, to meet the challenge of the market at any time.
Through the European CE safety certification, American UL safety certification, the company has a SC Japan JIS standard, the German DIN standards, AWG American standards, etc.
Companies always adhere to: quality first, service first, from raw materials into the factory inspection, process inspection to every working procedure, outbound packaging cengcengbaguan .
Company has own copper pipe, copper strip, copper platoon of raw material processing factory, with strong competitive advantage price on equal quality to every guest get the maximum benefits.