Nylon Cable Ties Longyi Terminals

When the heat-shrinkable casing is used as wire marking, the wire marking should be set on the wire before crimping, and then the crimping work should be carried out.  Do not use the heat shrink tubing on the one-sidedness of the cord end terminal. If a yellow cage terminal is used, the heat shrink tubing should be used at the place where the cable jacket is removed from the distance of 11mm.  The insertion of wire marking shall be the insertion of marking data or English letters along the radial direction of wire.  When marking the horizontal position, the data or English letters should be aligned (to the operator), and the data bits (the last bit) should be away from the cord end terminal, as shown in Figure 7 to Figure 8.  The standard mark is symmetrical and clear, and the orientation is appropriate. 

Ring insulated terminals

1, Cable Lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC
4, Surface: Tin-plated
5, Insulated material: PVC, nylon

6, Wire specification/rated: According customer required

Insulated Spade Terminals

The main products take references to the technical standards and quality requirements of advanced industrial countries such as America, Japan, German, France. Our products are widely applied in all kinds of electric cabinets, transformers, electric equipment, wiring harness manufacture, railway, communication, ship industry, aircraft and, PV, wind power,etc.,at home and abroad. About 50 % of the products are exported to more than 100 countries and regions, such as Asia, European,America, Africa,etc., and our products are trusted by more than 800 famous companies, such as ZTE Corporation, Huawei Telecommunications, Haier Electronics, Toshiba Transformer, Siemens electrical appliances, etc